The Formation and Behaviour of Montmorillonite During the Use of Wet Forward Combustion in the Alberta Oil Sand Deposits

Chris T. Perry, J. E. Gillott

Bulletin of Canadian Petroleum Geology · 1979 · 14 citations · 0 references

Concepts

Abstract

ABSTRACT One method of in situ extraction currently being considered for use in the Alberta Oil Sands is Wet Forward Combustion, a process which generates both hydrothermal and high-temperature conditions in the formation. Some of the mineral transformations that may occur under these conditions have been studied in the laboratory with the use of bomb-type autoclaves and a firetube. Montmorillonite was found to form rapidly under hydrothermal conditions from mixtures of kaolinite, quartz and dolomite -- minerals that are frequently present in the Alberta deposits. When metakaolin was substituted for kaolinite, the formation of montmorillonite occurred at a greater rate. Irreversible collapse of montmorillonite did not take place in the fire zone until temperatures as high as 650°C were reached but kaolinite decomposed to metakaolin at 500°C. Under field conditions, the formation of montmorillonite in front of the fire zone can be expected at many localities in the Alberta deposits. Unless unusually high temperatures are reached, irreversible collapse of this mineral is unlikely to occur in the fire zone and its ability to expand and disperse readily in the presence of water will normally be retained. Its continued formation can be expected for some time behind the fire zone, possibly at an increased rate if temperatures in the fire zone were sufficiently high to transform kaolinite to metakaolin. Montmorillonite is a common cause of formation damage and remedial measures may have to be considered during the application of Wet Forward Combustion in the Alberta Oil Sand deposits.