International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde) · 2016 · 23 citations · 28 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsMetallic MaterialsMetallurgyAlloysCreep BehaviorCreep DeformationMetalsMicrostructure EvolutionPhase TransitionsAlloy Creep BehaviorCreep StrengthMicrostructural AlterationMicrostructural Evolution During AnnealingMicrostructural Evolution During CreepPhase Transformations In Iron AlloysPrecipitatesSolubility
Abstract The microstructural evolution in Fe – Al – Ta alloys containing 23 – 31 at.% Al and 1.5 – 2.2 at.% Ta has been studied in the temperature range 650 – 750 °C by annealing for 1, 10, 100 and 1 000 h. The experiments confirm that in this temperature range the precipitation of the stable hexagonal C14 Laves phase is preceded by formation of coherent, metastable L2 1 Heusler phase precipitates within the Fe – Al matrix. However, precipitates of C14 are observed after much shorter annealing times than previously assumed. Creep strength increases substantially with increasing Al content of the alloys because the solid solubility for Ta in the Fe – Al matrix increases with increasing Al content and solid-solution hardening contributes substantially to the observed high creep strength. It may therefore be that the microstructural changes during creep have no noticeable effect on creep strength.
28
Assessment of the Al–Fe–Ti system
Martin Palm, J. Lacaze · Intermetallics · 2006 · 120 citations
Natural Sciences, Materials Engineering, Materials Science +9