Journal of Ocean Engineering and Science · 2016 · 22 citations · 14 references
EngineeringCivil EngineeringFluid DynamicsHydraulic EngineeringHydraulicsFlow MeasurementHydraulic MachineryDynamic Pressure MeasurementExperimental StudiesFlow Rate CharacteristicsParticle Image VelocimetryPitot Tube MeasurementTurbine PerformanceTurbine TechnologyTurbines
A bend-free rectangular cross-section OWC device was designed and constructed for studying the effect of inclination on the flow characteristics inside the device. The inclination is meant to reduce reflection of waves and induce higher velocities in the turbine section. Experimental measurements were made in a wave channel where the OWC device was tested. An S-type Pitot tube was used to measure dynamic pressure of air in the turbine section at several inclinations. Particle Image Velocimetry (PIV) was also done to study the flow of both air and water in the OWC device. In order to focus solely on primary energy capture, no turbine was installed in the OWC device. The dynamic pressure readings were analysed for suction and compression stages. Water volume fluctuations inside the capture chamber were also recorded and compared for different inclinations. The result was an increase in the velocity of air flowing in the capture chamber and hence a rise in the kinetic energy available to the turbine. It was found from experimental studies that as the angle of inclination reduced, the velocity of air in the turbine section increased. The lower angles also caused higher run-up and larger volume of water into the capture chamber.
14
A modified Wells turbine for wave energy conversion
Toshiaki Setoguchi, S. Santhakumar, Manabu TAKAO et al. · Renewable Energy · 2002 · 86 citations
WAVE REFLECTION FROM COASTAL STRUCTURES
Barbara Zanuttigh, Jentsje W. van der Meer · 2007 · 53 citations