Microwave journal · 2006 · 18 citations · 0 references
EngineeringElectrical EngineeringAntennasMicrowave EngineeringWireless CommunicationsAntenna DesignAntenna Radiation PatternsAntenna SimulationMicrowave AntennasPlanar AntennasUltra-wideband CommunicationAntenna Input ImpedanceInput ImpedanceMonopole AntennasPlanar Monopole AntennasPower Spectral DensityPower Spectral Density AnalysisShapingUltra-wideband Antennas
A planar printed triangular monopole antenna (PTMA) is presented for ultra-wideband (UWB) communications. The HFSS 3-D EM solver is employed for design simulation. A printed PTMA has been fabricated on a FR-4 substrate. The measured VSWR is less than 3 from 4 to 10 GHz. In the UWB communications frequency range, the measured phase distribution of the input impedance is quite linear and the H-plane patterns are almost omni-directional. The Kirchhoffs surface integral representation (KSIR) was adopted in the developed FDTD code to compute the far-field distributions from the near-field ones in the time domain. This is to investigate the radiated power spectral density (PSD) shaping to comply with the Federal Communications Commission (FCC) emission limit mask. The effect of various source pulses (first-order Rayleigh pulses with σ = 20, 30 and 50 ps) on the radiated PSD shaping is also studied.