Publication | Closed Access
Grain Size Dependence of Dielectric Constant for Modified (Pb<sub>0.63</sub>Ba<sub>0.37</sub>)(Zr<sub>0.7</sub>Ti<sub>0.3</sub>)O<sub>3</sub>Ceramic Material
22
Citations
12
References
1994
Year
Materials ScienceMaterials EngineeringDielectric ConstantHigh Temperature MaterialsEngineeringCeramic MaterialApplied PhysicsCeramics MaterialsFerroelectric MaterialsGrain Size DependenceCeramic PowdersGrain SizeCeramic TechnologyMicrostructure
The grain size dependence of the dielectric constant for a modified (Pb 0.63 Ba 0.37 )(Zr 0.7 Ti 0.3 )O 3 material from -55° C to 150° C has been studied. Grain sizes in the range of 1.2 µ m to 7.0 µ m were prepared by varying the sintering temperature and time. The maximum dielectric constant decreased monotonously as the grain size decreased. The dielectric constant at a lower temperature for the ferroelectric phase (-55° C) also decreased monotonously. However, at a high temperature for the cubic phase (150° C), the dielectric constant was almost constant. This monotonous decrease of the dielectric constant at a lower temperature is the same phenomenon as for the Pb(Mg 1/3 Nb 2/3 )O 3 material. The Curie temperature of the ceramic shifted toward a higher temperature as the grain size was reduced. However, the aging rate was almost independent of the grain size.
| Year | Citations | |
|---|---|---|
Page 1
Page 1