2013 · 12 citations · 98 references
MedicineOrthopaedic SurgeryOrthopedic SurgeryBiomechanicsFinite Element AnalysisOrthopedicsBiomechanical AnalysisBone BiomechanicsBone MechanicsFracture BiomechanicsFracture MechanicsHip BiomechanicsBone Fracture BiomechanicsBone Fracture MechanicsBone Fracture RiskFemur FracturesFinite Element Analysis Of BoneFinite Element Fracture AnalysisFinite Element ModelingHip Fracture Biomechanics
Hip fracture is a significant problem in health care incurring major costs to society. Therefore, it is necessary to study fracture mechanisms and develop improved methods to estimate individual fracture risk. In addition to conventional bone density measurements, computational finite element (FE) analysis has been recognized as a valuable method for studying biomechanical characteristics of a hip fracture. In this study, computed tomography (CT) based finite element methods were investigated and simulation models were developed to estimate experimental femoral fracture load and hip fracture type in a sideways fall loading configuration. Cadaver femur specimens (age 55–100 years) were scanned using a CT scanner and dual-energy X-ray absorptiometry (DXA), and the femurs were mechanically tested for failure in a sideways fall loading configuration. CT images were used for generating the FE model, and DXA was used as a reference method. FE analysis was done for simulation models of the proximal femur in a sideways fall loading configuration to estimate the experimentally measured fracture load and fracture type. Statistical analyses were computed to compare the experimental and the FE data. Cervical and trochanteric hip fractures displayed characteristic strain patterns when using a FE model mainly driven by bone geometry. This relatively simple FE model estimation provided reasonable agreement for the occurrence of experimental hip fracture type. Accurate assessment between experimental and finite element fracture load (r2 = 0.87) was achieved using subjectspecific modeling, including individual material properties of trabecular bone for bilinear elastoplastic FE models. Nevertheless, the study also showed that proximal femoral fracture load can be estimated with reasonable accuracy (r2 = 0.73) by a relatively simple FE model including only cortical bone. The cortical bone FE model was more predictive for fracture load than DXA and slightly less accurate than the subject-specific FE model. The accuracy and short calculation time of the model suggest promise in terms of effective clinical use.
98
John A. Professor Kanis, L. Joseph Melton, Claus Christiansen et al. · Journal of Bone and Mineral Research · 1994 · 3.9K citations
Risk Factors for Hip Fracture in White Women
Steven R. Cummings, Michael C. Nevitt, Warren S. Browner et al. · New England Journal of Medicine · 1995 · 3.6K citations · Full text