Zenodo (CERN European Organization for Nuclear Research) · 2013 · 11 citations · 0 references
EngineeringCivil EngineeringMaterials EngineeringBuilding MaterialsStructural EngineeringStructural MaterialsConcrete ConstructionCorrosion Of Construction MaterialsDuctilityReinforced Concrete StructuresStructural DesignBendingCorrosion Resistance MaterialsCrack Development Due To CorrosionDuctile DamageDuctile FailureFibersTorsionTorsional Behavior
This paper investigates experimentally and<br> analytically the torsion behavior of steel fibered high strength self<br> compacting concrete beams reinforced by GFRP bars. Steel fibered<br> high strength self compacting concrete (SFHSSCC) and GFRP bars<br> became in the recent decades a very important materials in the<br> structural engineering field. The use of GFRP bars to replace steel<br> bars has emerged as one of the many techniques put forward to<br> enhance the corrosion resistance of reinforced concrete structures.<br> High strength concrete and GFRP bars attract designers and<br> architects as it allows improving the durability as well as the esthetics<br> of a construction. One of the trends in SFHSSCC structures is to<br> provide their ductile behavior and additional goal is to limit<br> development and propagation of macro-cracks in the body of<br> SFHSSCC elements. SFHSSCC and GFRP bars are tough, improve<br> the workability, enhance the corrosion resistance of reinforced<br> concrete structures, and demonstrate high residual strengths after<br> appearance of the first crack. Experimental studies were carried out<br> to select effective fiber contents. Three types of volume fraction from<br> hooked shape steel fibers are used in this study, the hooked steel<br> fibers were evaluated in volume fractions ranging between 0.0%,<br> 0.75% and 1.5%. The beams shape is chosen to create the required<br> forces (i.e. torsion and bending moments simultaneously) on the test<br> zone. A total of seven beams were tested, classified into three groups.<br> All beams, have 200cm length, cross section of 10×20cm,<br> longitudinal bottom reinforcement of 3