Use of an Engine Cycle Simulation to Study a Biodiesel Fueled Engine

Junnian Zheng

OakTrust (Texas A&M University Libraries) · 2010 · 12 citations · 18 references

Concepts

Abstract

Based on the GT-Power software, an engine cycle simulation for a biodiesel\nfueled direct injection compression ignition engine was developed and used to study its\nperformance and emission characteristics. The major objectives were to establish the\nengine model for simulation and then apply the model to study the biodiesel fueled\nengine and compare it to a petroleum-fueled engine.\nThe engine model was developed corresponding to a 4.5 liter, John Deere 4045\nfour-cylinder diesel engine. Submodels for flow in intake/exhaust system, fuel injection,\nfuel vaporization and combustion, cylinder heat transfer, and energy transfer in a\nturbocharging system were combined with a thermodynamic analysis of the engine to\nyield instantaneous in-cylinder parameters and overall engine performance and emission\ncharacteristics.\nAt selected engine operating conditions, sensitivities of engine performance and\nemission on engine load/speed, injection timing, injection pressure, EGR level, and\ncompression ratio were investigated. Variations in cylinder pressure, ignition delay, bsfc,\nand indicated specific nitrogen dioxide were determined for both a biodiesel fueled\nengine and a conventional diesel fueled engine. Cylinder pressure and indicated specific\nnitrogen dioxide for a diesel fueled engine were consistently higher than those for a\nbiodiesel fueled engine, while ignition delay and bsfc had opposite trends. In addition,\nnumerical study focusing on NOx emission were also investigated by using 5 different\nNO kinetics. Differences in NOx prediction between kinetics ranged from 10% to 65%.

References

18