ACS Applied Materials & Interfaces · 2016 · 93 citations · 35 references
Natural SciencesMaterials EngineeringMaterials ScienceElectrochemistryNanomaterialsNanotechnologyCarbon NanomaterialsElectrochemical Energy StorageElectrode MaterialsNanoenergy MaterialsNanostructured Energy MaterialsRedox-active MaterialsCarbon For Sodium-ion BatteriesCarbon Nanomaterials For Energy StorageCarbon NanosheetsElectrochemical Properties Of Carbon NanomaterialsFabricationNanosheetsReduced Graphene OxideSpecific Capacity
Advanced design of nanostructured functional carbon materials for use in sustainable energy storage systems suffers from complex fabrication procedures and the use of special methods and/or expensive precursors, limiting their practical applications. In this study, nanoporous carbon nanosheets (NP-CNSs) containing numerous redox-active heteroatoms (C/O and C/N ratios of 5.5 and 34.3, respectively) were fabricated from citrus peels by simply heating the peels in the presence of potassium ions. The NP-CNSs had a 2D-like morphology with a high aspect ratio of >100, high specific surface area of 1167 m(2) g(-1), and a large amount of nanopores between 1 and 5 nm. The NP-CNSs also had an electrical conductivity of 2.6 × 10(1) s cm(-1), which is approximately 50 times higher than that of reduced graphene oxide. These unique material properties resulted in superior electrochemical performance with a high specific capacity of 140 mAh g(-1) in the cathodic potential range. In addition, symmetric full-cell devices based on the NP-CNSs showed excellent cyclic performance over 100,000 repetitive cycles.
35
Sodium Ion Insertion in Hollow Carbon Nanowires for Battery Applications
Yuliang Cao, Lifen Xiao, Maria L. Sushko et al. · Nano Letters · 2012 · 1.9K citations
Natural Sciences, Materials Engineering, Materials Science +17