Journal of Geotechnical and Geoenvironmental Engineering · 2016 · 105 citations · 37 references
EngineeringCivil EngineeringGeotechnical EngineeringMechanical Behavior Of MaterialsSoil MechanicsConstitutive ModelingEarth ReinforcementEarth Retaining StructuresGeomechanicsRetaining WallsSoil ReinforcementGeogrid ReinforcementLaboratory TestingLaboratory Testing Of Geosynthetic ReinforcementMechanically Stabilized Earth StructuresMechanically Stabilized Earth WallsNumerical ModelingNumerical Modeling Of Retaining StructuresReinforced Retaining Walls
The walls were constructed as part of the highway SR‑18 approach fills for a bridge near Seattle, Washington. The paper reports numerical model details and predictions of the end‑of‑construction performance for two instrumented and well‑documented mechanically stabilized earth walls. The authors modeled the geogrid‑reinforced block face walls with a commercial 2D finite‑difference program, selecting material properties from laboratory tests, simulating reinforcement with a nonlinear load‑strain‑time secant stiffness model and cable elements, and comparing predicted reinforcement loads at construction end with measured values and AASHTO Simplified, K‑stiffness, and Simplified Stiffness methods. Predicted wall deformations and reinforcement strains agreed reasonably with measured data, showing that Class C predictions using linear or nonlinear elastic‑plastic soil models can reliably estimate deformations and reinforcement strains when high‑quality project data are available, making the study a useful benchmark for modelers.
The paper reports numerical model details and predictions of the end-of-construction performance for two instrumented and well-documented mechanically stabilized earth (MSE) walls. The walls were constructed as part of the highway SR-18 approach fills for a bridge near Seattle, Washington. The geogrid reinforced block face walls were modeled using a commercially available two-dimensional (2D) finite-difference program. The paper provides details on how material properties were selected from laboratory testing of wall components and how the computer modeling was carried out. The paper shows that predicted wall deformations and reinforcement strains were in reasonable agreement with measured data using both linear elastic-plastic and nonlinear elastic-plastic constitutive models for the soil. The geogrid reinforcement was simulated using a nonlinear load-strain-time secant stiffness model and cable elements. The paper compares numerical predictions of reinforcement loads at end of construction with measured values and predictions using a AASHTO Simplified Method, K-stiffness Method, and Simplified Stiffness Method. The paper is a useful benchmark for modelers because it demonstrates what the authors believe are reasonable expectations of model accuracy for Class C predictions of deformations and reinforcement strains for these types of walls when high-quality project information is available.
37
Predictions in soil engineering
T. William Lambe · Géotechnique · 1973 · 333 citations · Full text
Engineering, Civil Engineering, Construction Engineering +15
Angles of friction and dilatancy of sand
Tom Schanz, P. A. Vermeer · Géotechnique · 1996 · 284 citations