SAE technical papers on CD-ROM/SAE technical paper series · 2005 · 31 citations · 28 references
EngineeringMechanical EngineeringCombustionExperimental PerformanceInternal Combustion EnginesCombustion ProcessesEngine DesignEngine PerformanceEngine Performance CharacteristicsEngine SystemsSpark-ignition EnginesCombustion CharacteristicsDirect InjectionDirect Injection CombustionEngine-out Emissions AnalysisFuel ConsumptionInjection TimingStratified Charge CombustionStratified Charge Injection
This work describes an experimental investigation on the stratified combustion and engine-out emissions characteristics of a single-cylinder, spark-ignition, direct-injection, spray-guided engine employing an outward-opening injector, an optimized high-squish, bowled piston, and a variable swirl valve control. Experiments were performed using two different outward-opening injectors with 80° and 90° spray angles, each having a variable injector pintle-lift control allowing different rates of injection. The fuel consumption of the engine was found to improve with decreasing air-swirl motion, increasing spark-plug length, increasing spark energy, and decreasing effective rate of injection, but to be relatively insensitive to fuel-rail pressure in the range of 10-20 MPa. At optimal injection and ignition timings, no misfires were observed in 30,000 consecutive cycles. Multiple pulsing of the injector did not improve upon the single injection-pulse results either by changing the timing of the injection process or by changing the dwell time between injection events.
28
Rainer Ortmann, Stefan K. Arndt, J. Raimann et al. · SAE technical papers on CD-ROM/SAE technical paper series · 2001 · 80 citations
Engineering, Aerospace Engineering, Mechanical Engineering +17