Applied Spectroscopy · 2015 · 28 citations · 27 references
Natural SciencesMaterials EngineeringMaterials ScienceCeramic MaterialsCeramicsMaterials CharacterizationFracture DetectionFracture MechanicsMicrostructure AnalysisPhase AnalysisPhase IdentificationRaman SpectroscopyNondestructive TestingPhase Transformation AnalysisTensile StrainTetragonal To Monoclinic TransformationThree-point Bending TestZirconiaZirconia CeramicsZirconia Materials
The aim of this study was to perform micro-Raman spectroscopy as an alternative and nondestructive method to identify the phase transformation of zirconia after mechanical stress. The groups evaluated were experimental zirconia, zirconcad, IPS e.max ZirCad, and In Ceram YZ. Ten specimens were constructed for each group (n = 30) and subjected to a three-point bending test with a crosshead speed of 0.5 mm/min. The fractured surfaces were analyzed by micro-Raman spectroscopy. The laser power was kept at 10 mW, and scanning was performed in three regions of the fractured surface: (i) near the source of the failure (region of tensile stress), (ii) central to the fractured surface, and (iii) far from the source of failure. All materials showed the characteristic bands of tetragonal and monoclinic phases of zirconia. All zirconia studied showed a monoclinic phase in the tensile stress region. Micro-Raman spectroscopy was effective in detecting the presence of crystalline phases in polycrystals ceramics.
27
Phase Analysis in Zirconia Systems
R. C. Garvie, Patrick S. Nicholson · Journal of the American Ceramic Society · 1972 · 1.4K citations
Five-year clinical results of zirconia frameworks for posterior fixed partial dentures.
Irena Sailer, Aurel Fehér, Frank Filser et al. · PubMed · 2007 · 802 citations