Agglomeration and Accretion of Drill Cuttings in Water-Based Fluids

S. Cliffe, S. Young

2008 · 12 citations · 7 references

Concepts

Abstract

Water-based drilling fluids have evolved as new chemical solutions have been developed to reduce or significantly retard their interaction with claystones and shales. Issues related to cuttings agglomeration and accretion can lead to increased non-productive time which can make water-based drilling fluids less attractive as alternatives to oil-based drilling fluids. Cuttings agglomeration and accretion are highly dependant on the morphology of the sedimentary rock formations being drilled. Experimental results are presented herein on a number of outcrop shales to show the effect that cuttings type and morphology has on agglomeration. Possible mechanisms for agglomeration, linked to the kinetic hydration and plastic deformation, of cuttings when exposed to water-based drilling fluids are discussed. High-performance water-based drilling fluids typically contain specific additives to enhance their lubricity and shale inhibitive properties. Adsorption of certain polymers can lead to an increase in the surface stickiness of cuttings and therefore an increased agglomeration potential. Experimental results from testing various encapsulating polymer chemistries are presented, showing that polymers with more hydrophobic moieties are beneficial. Experimental results will also be presented showing the benefits of certain film-forming additives to reduce the onset of cuttings agglomeration and the negative effects that can occur with certain lubricants based on vegetable oils and fatty acid derivatives. The authors show that careful selection of drilling fluid components can help to reduce the potential for cuttings agglomeration and thus enhance the performance of water-based drilling fluids.

References

7