Intermittent Slow Sand Filters for Household Use - A Field Study in Haiti

Derek Baker, William F. Duke

2006 · 11 citations · 1 references

Concepts

Abstract

An intermittent slow sand filter for household use, commonly referred to as the Biosand Filter (BSF), was developed by Dr. David Manz at the University of Calgary, Canada, in the 1990's. The version most widely in use is constructed of concrete, stands 95 cm in height and 36 cm in width. The flow rate is 20 - 40 litres per hour. The cost to produce a BSF is approximately 15 to 30 Euros (20 - 40 USD). Over 80,000 Biosand Filters are in use in 36 countries. Modifications to conventional slow sand filtration include; 1) reducing the height of the supernatant to 5 cm to provide the schmutzdecke or 'biofilm' with sufficient oxygen to allow intermittent use, and 2) eliminating the need for sand bed removal through a 'clean in place' technique which simplifies maintenance. These adaptations provide an affordable option for household application of slow sand filter technology to treat drinking water in rural and peri-urban communities of developing countries. In early 2005, a field study of the Biosand Filter was undertaken in Haiti by the Centre for Affordable Water and Sanitation Technology (CAWST), a Canadian NGO, and the University of Victoria, Canada. The effectiveness of the BSF in removing E. coli and decreasing turbidity was evaluated for 107 filters which had been in use for an average of 2.5 years (range 1 to 5 years). The sustained use and user satisfaction were assessed through interviews in each of the 107 households. Durability of the filter, maintenance requirements, and affordability were appraised by recording specific observations during the visits.

References

1