Petroleum Source Rocks and Stratigraphy of the Bakken Formation in North Dakota

Rick L. Webster

AAPG Bulletin · 1987 · 90 citations · 0 references

Concepts

Abstract

The Bakken Formation (Devonian and Mississippian) of North Dakota consists of upper and lower black, organicrich shales separated by a calcareoh siltstone middle member. The formation is a relatively thin unit [maximum thickness of 145 ft (44.2 m)] with the lower shale attaining a maximum thickness of 50 ft (15.2 m) and the upper shale a thickness of 23 ft (7 m). The shales are hard, siliceous, pyritic, fissile, and noncalcareous. They contain abundant conodonts and tasmanites and have planar laminations accented by pyrite, The upper and lower shales were apparently deposited in an offshore, marine, anoxic environment where anoxic conditions may have been caused by a stratified water column resulting from restricted circulation. Organic matter deposited in the black shales was derived mostly from planktonic algae. Organic geochemical analyses used to evaluate the Bakken shales as petroleum source rocks include organic carbon measurements, chromatographic analysis of organic extracts, pyrolysis, vitrinite reflectance, and visual kerogen typing. The Bakken shales are very organicrich (average of 11.33 wt% organic carbon) and contain predominantly amorphous kerogen which is inferred to be sapropelic. The onset of hydrocarbon generation occurred at an average depth of 9,ooO ft (2,740 m) based on interpreting plots of geochemical parameters with depth (e.g. ratios of hydrocarbon to nonhydrocarbon, saturated hydrocarbon to organic carbon, pyrolytic hydrocarbon to organic carbon, and the pyroiyss production index). Hydrocarbon content and thermal kerogen breakdown increase greatly in the shales where they are buried more than 9,OOO ft (2,740 m). The effective source area of the Bakken, as determined by maps of the above chemical parameters, lies mostly in McKenzie, Williams, Dunn, and Billings counties. Oil generation in the shales probably began about 75 million years ago (Late Cretaceous time) at a temperature of about 100°C, and initial expulsion of oil from the Bakken probably occurred 70 million years ago (Late Cretaceous time). Vertical fracture systems, located primarily along the Nesson anticline, Antelope oil field, and the Billings anticline seem to be the most reasonable pathways for migration of oil to occur from the Bakken. The amount of oil generated by the Bakken in North Dakota, as calculated from pyrolysis data, is 92.3 billion barrels of oil. If only 10% of this oil was actually expelled from the shales it could easily account for the 3 billion barrels of known type two oil re seNes in the Williston basin.