Study of a Pressurized Metered-dose Inhaler Spray Parameters in Fluent™

Ricardo F. Oliveira, Luís F. Silva, José Carlos Teixeira, Henedina Antunes

2010 · 10 citations · 8 references

Concepts

Abstract

The objective of this paper is to help fulfill the lack of information about the parameters needed to simulate a pressurized metered-dose inhaler (pMDI) spray (using a commercial computational fluid dynamics tool), providing future researchers the necessary information to study other pMDIs related devices, such as holding chambers. Following a previous bibliographic research about the characteristics of a pMDI spray, a further compilation was needed regarding the information to computationally define the spray in Fluent™. A very common drug asthma treatment (Ventolin®) was used in this study, with particles diameters going from 1.22 µm to 49.5 µm in a Rosin-Rammler distribution. The parameters were tested in Fluent™ (v6.3.26), using a three-dimensional testbox created especially for this purpose and meshed using the Gambit™ software (v2.2.30). The results showed that the selected parameters have produced a simulated spray very similar to the real one. It was also observed that the air behavior inside the testbox had a predictable response.

References

8