2012 · 13 citations · 4 references
EngineeringSystems EngineeringEquipmentInstrumentationTime Series AnalysisCondition MonitoringDiagnosticsFault DetectionMachine TestingMechanical MeasurementSynchronous MachinesGear Fault DiagnosisGear FaultsGearbox Fault DiagnosisMachine Condition MonitoringMachine Fault DiagnosisMachine Health MonitoringOrder TrackingRotating Machinery Diagnostics
Order-tracking is a method to remove speed fluctuations from a varying frequency signal allowing constant frequency based Machine Condition Monitoring (MCM) analysis techniques to be employed. Even small amounts of speed variation have to be compensated for by order-tracking when fine analysis is to be carried out, such as time synchronous averaging (TSA) for gear diagnostics. Some machines, such as wind turbines, have much more widely varying operating speeds, and so order-tracking is necessary before even basic diagnostics can be conducted. This paper describes a method whereby angular resampling can be carried out with and without a tacho signal, using progressive iterations in a multi-stage approach, even in the case of large speed variations. Measurements were made on a gear test rig with a faulty gear, with speed varying over a number of different ranges up to ±25%. Results show that speed fluctuations could be removed successfully allowing subsequent TSA and gearmesh demodulation techniques to correctly diagnose a seeded tooth root crack.
4
Frédéric Bonnardot, Mohamed El Badaoui, Robert B. Randall et al. · Mechanical Systems and Signal Processing · 2004 · 330 citations
Engineering, Electrical Engineering, Mechanical Engineering +13