2011 · 12 citations · 0 references
Natural SciencesMaterials EngineeringMaterials ScienceHeat TransferMetallic MaterialsPlasma PhysicsHigh-temperature PlasmasPlasma FundamentalsPlasma HeatingPlasma SimulationPlasma SourcesPlasma-surface InteractionsArc Plasma PhysicsArc SprayingHeat SourcesPlasma Heat FluxPlasma Sprayed CoatingsPlasma SprayingPlasma-enhanced DepositionSpray Process Parameters
Suggested is a mathematical model describing the thermal state of a solid metal wire used as anode in plasma arc spraying of coatings. Contribution of different heat sources to the energy balance of the spraying wire is numerically investigated. The effect of spraying parameters on the distribution of temperature in the wire, melting and evaporation of its material is analysed. Heating of the wire material, its melting and forma- tion of fine spraying particles in plasma arc spraying occur due to the energy released in the anode spot of the arc closed to the wire and the electric current flowing through it, and due to the energy introduced into the wire with the transverse flow of the arc plasma around the wire (1). As a result, the efficiency of the wire melting process substantially grows compared, for example, to the traditional electric arc metallisa- tion process (1). For the above reasons the productiv- ity and stability of the plasma arc spraying process will depend in many respects on the conditions of heat exchange between the anode wire and heat sources affecting it. Knowledge of the main mechanisms of heating and melting of the electrode wire in plasma arc spraying of coatings will make it possible to de- velop the efficient control systems for this technologi- cal process, which will allow not only controlling the process productivity, but also regulating the time dur- ing which metal remains in the liquid state, size of the forming drops, etc. Therefore, development of mathematical models describing the processes that oc- cur during heating and melting of the anode wire, as well as mathematical modelling of the above processes are of high importance for further upgrading of the plasma arc wire spraying process, increase of its pro- ductivity and improvement of quality of the resulting coatings. The thermal state of the electrode wire heated by the electric current flowing through it and heat intro- duced by the electric arc has been well studied by now. In particular, analytical expressions were de- rived to determine temperature fields in a consumable electrode during welding (2), temperature fields in a coated electrode wire were investigated (3), heat, mass and electric charge transfer processes in the consum- able electrode—arc—weld pool system were analysed in detail (4, 5), etc. At the same time, peculiarities of the additional thermal effect by the transverse plasma flow on the consumable live wire (along with heating by the electric arc and ohmic heating) are insufficiently studied as yet. The purpose of this study is to develop a mathe- matical model describing thermal interaction of the anode region of the electric arc, plasma flow and elec- tric current with the anode wire under conditions of plasma arc wire spraying. Consider the limiting-state temperature field formed in the anode wire fed at a constant speed. The transient thermal processes related to variations or fluctuations of the spraying process parameters, such as plasma arc current or wire feed speed, can also be of a certain interest. However, some quasi-stationary temperature field forms in the wire in stable operation of the plasma torch and wire feeder, and description of this field will allow revealing the main mechanisms of heating and melting of the wire during the spraying process under investigation.