IEEE Transactions on Biomedical Circuits and Systems · 2015 · 40 citations · 26 references
EngineeringComputer EngineeringElectrical EngineeringAnalog ElectronicsLow-power DesignMicroelectronicsDynamic Power ReductionElectrocardiographyEnergy-efficient Embedded SystemsLow-noise Circuit DesignLow-power Digital Circuit DesignPower ManagementCardiac Monitoring SystemsFlip-flop ArchitectureFlip-flop DesignHeartbeat MonitoringLow-power Flip-flop DesignNoise ToleranceNon-volatile MemoryNon-volatile Memory Design
This paper describes an electrocardiograph (ECG) monitoring SoC using a non-volatile MCU (NVMCU) and a noise-tolerant instantaneous heartbeat detector. The novelty of this work is the combination of the non-volatile MCU for normally off computing and a noise-tolerant-QRS (heartbeat) detector to achieve both low-power and noise tolerance. To minimize the stand-by current of MCU, a non-volatile flip-flop and a 6T-4C NVRAM are used. Proposed plate-line charge-share and bit-line non-precharge techniques also contribute to mitigate the active power overhead of 6T-4C NVRAM. The proposed accurate heartbeat detector uses coarse-fine autocorrelation and a template matching technique. Accurate heartbeat detection also contributes system-level power reduction because the active ratio of ADC and digital block can be reduced using heartbeat prediction. Measurement results show that the fully integrated ECG-SoC consumes 6.14 μ A including 1.28- μA non-volatile MCU and 0.7- μA heartbeat detector.
26
Heart rate variability: Standards of measurement, physiological interpretation, and clinical use
Marek Malik, J. Thomas Bigger, A. John Camm et al. · European Heart Journal · 1996 · 15.3K citations · Full text
Nursing, Cardiology, Physiology +15
A Real-Time QRS Detection Algorithm
Jiapu Pan, W.J. Tompkins · IEEE Transactions on Biomedical Engineering · 1985 · 7.7K citations