Canadian Geotechnical Journal · 1995 · 56 citations · 24 references
EngineeringCivil EngineeringEarth SciencesGeotechnical EngineeringHydraulic FracturingSoil MechanicsClay MineralsEffective StressIn-situ Stress MeasurementIn-situ TestingClaysDilatometer TestDilatometer TestingEffective Stress In ClaysIn Situ CharacterizationIn-situ Stress CharacterizationOverconsolidationOverconsolidation Ratio
An approximate value of the horizontal effective stress in an overconsolidated clay deposit is often determined from an estimate of the effective stress ratio, K 0 , using the equation [Formula: see text]. It is also generally considered that the α parameter is approximately equal to sin [Formula: see text]. For evaluating K 0 in sensitive clays of eastern Canada, a testing program has been initiated on three different sites representing a large range of overconsolidation ratios. Three different in situ devices were used: the Cambridge self-boring pressuremeter, the flat dilatometer, and hydraulic fracturing. The results show that the different techniques give essentially the same K 0 values. They also give K 0 values larger than those expected, with an α parameter typically between 0.75 and 1.15. Key words : clay, dilatometer, horizontal stress, hydraulic fracturing, in situ tests, self-boring pressuremeter.
24
Transportation Research Record
Anne Vingaard Olesen, Erik Kjems, Kristian Hegner Reinau et al. · 2016 · 11.4K citations
In Situ Tests by Flat Dilatometer
Silvano Marchetti · Journal of the Geotechnical Engineering Division · 1980 · 468 citations
The coefficient of earth pressure at rest
G. Mesri, Tahir Hayat · Canadian Geotechnical Journal · 1993 · 274 citations
Cα/Cc Concept and K0 During Secondary Compression
G. Mesri, A. Castro · Journal of Geotechnical Engineering · 1987 · 266 citations