Advances in Polymer Technology · 2015 · 31 citations · 33 references
EngineeringChemical EngineeringMechanical EngineeringComputational Fluid DynamicsFluid DynamicsPolymer EngineeringExtrusion ProcessingMaterial ExtrusionPolymer BlendsPolymer ExtrusionShear-driven MixingBlendingDispersive MixingExperimental ValidationExtrusionPolymer BlendingPressure DropShear FlowsTwin-screw Extrusion
ABSTRACT Twin‐screw extruders (TSE) are typically the equipment of choice in polymer blending and compounding operations due to the relatively high stresses and controllable residence times they impart on the melts. However, the mixing action is shear dominated and shear flows are energetically inefficient for dispersive mixing by comparison with extensional flows. We present a new extensional mixing element (EME), developed as a static dispersive mixing element for TSEs with dispersive mixing provided by extension‐dominated flow through stationary hyperbolically contracting channels. In Part 1 of the work, we present the design and show, experimentally and computationally, that the EME effectively imparts extension‐dominated flow through its channels. We also show that the flow is fully developed throughout most of the EME sections, with only small inlet transients being observed, and that it is possible to predict the real pressure drop in the system. Experimental validation of the EME for immiscible blends of varying viscosity ratios will be discussed in Part 2.
33
Microfluidic extensional rheometry using a hyperbolic contraction geometry
Thomas J. Ober, Simon J. Haward, Christopher J. Pipe et al. · Rheologica Acta · 2013 · 147 citations · Full text
Engineering, Bioengineering, Physics +14