Validation of NCAR 10.6-<i>μ</i>m CO₂Doppler Lidar Radial Velocity Measurements and Comparison with a 915-MHz Profiler

Abstract

The capability of the NCAR 10.6-m-wavelength CO 2 Doppler lidar to measure radial air motion is validated by examining hard-target test data, comparing measurements with those from a two-axis propeller anemometer and a 915-MHz profiling radar, and analyzing power spectra and autocovariance functions of the lidar radial velocities in a daytime convective boundary layer. Results demonstrate that the lidar is capable of measuring radial velocity to less than 0.5 m s 1 precision from 20 laser pulse averages under high signal-to-noise ratio conditions. Hard-target test data and comparisons with other sensors show that the lidar data can be biased by as much as 2 m s 1 when operating in the coherent oscillator mode and that correlated errors are negligible. Correlation coefficients are as large as 0.96 for 90-min comparisons of horizontal velocities averaged for 1 min from the lidar and anemometer, and 0.87 for 2.5-h comparisons between vertical velocities averaged for 30 s from the lidar and profiler. Comparisons of the lidar and profiler vertical velocities are particularly encouraging for the profiler since these results show that 915-MHz profilers are capable of making good vertical velocity measurements in strong convective boundary layers. The authors conclude that despite the commonplace systematic bias in lidar radial velocity, ground-based operation of the NCAR CO 2 Doppler lidar can provide valuable velocity data for meso-and microscale meteorological studies. The lidar can also provide filtered velocity statistics that may be useful for boundary layer turbulence research.