Journal of Aircraft · 2008 · 80 citations · 3 references
EngineeringAerospace EngineeringMaterials EngineeringAerospace MaterialsAerospace StructuresMechanical Behavior Of MaterialsLightweight Structural MaterialsMaterial TestingStrength Of MaterialsStress AnalysisStress-strain BehaviorStructural TestingBiaxial StrengthEngineering Stress-strain AnalysisStress Field EstimationStress Field ModelingStress-strain AnalysisStructural StrengthTensile StrengthTensile Strength Testing
In a design criterion of a nonrigid airship, such as FAA-P-8110-2, Airship Design Criteria, it is specified to measure the tear strength of the envelope material. However, the tear strength itself has no definite relationship with the actual tear propagation characteristics of an airship envelope material. Therefore, there are several investigations to establish the relationship. To study it, tests are conducted to measure the tear propagation stress to find the appropriate formula. To simulate the actual stress field, two kinds of tests are carried out: a biaxial tensile test and a pressurized cylinder test. Both tests simulate the biaxial stress field on an airship envelope. The material tested is the high-strength and lightweight envelope material, Z2929T-AB. This is one of the envelope materials with Zylon as its base fabric and is developed especially for the technology demonstrator of a stratospheric platform. This material has a density as low as 157 g/m 2 ; nevertheless, the tensile strength is as high as 997 N/cm. The measurement is made to find the stress that initiates the tear propagation. The data are fitted to Thiele's formula and the correlation is excellent. By using Thiele's empirical equation, the minimum slit size of the tear propagation under the limit stress is estimated. For the technology demonstrator of the stratospheric platform, which is planned to have an overall length of 150 m and the maximum diameter of 38 m, the slit size of less than 40 mm does not allow tear propagation under the limit load. The consideration of the stress field near the slit introduces a different approach for the empirical formula, and this leads to the equation which correlates very well the tear propagation stress with the tensile strength of the envelope material. These two results are described, as well as the test details.
3