2010 · 15 citations · 10 references
EngineeringElectrical EngineeringAutomotive ElectronicsCircuit TheoryPower ElectronicsDc-ac InvertersDc-dc ConversionDc-dc ConvertersElectromagnetic CompatibilityHigh-frequency Power ConversionMagnetic Circuit AnalysisConducted EmissionsConvertersElectromagnetic Interference MitigationElectromagnetic Interference ReductionFilter SimulationFiltersFrequency-domain ElectromagneticsPower Converter Design
The subject of this paper is the design of EMI filters for the DC-DC converters. It is well known that the static converters used in electric traction systems are major sources of conducted disturbances which are the common mode and differential mode. Often, the solution used to reduce conducted emissions consists to use the EMI filters. The design of these filters is very difficult because it requires complete mastery of the design process. In this paper, we propose a design method of the EMI filter based on the simulation of the filter in frequency domain. Thus, the high frequency models of the filter components are proposed. The obtained models have been tested and give good results on a large frequency range, from 9 kHz to 30 MHz.
10
Effects of Parasitic Parameters on EMI Filter Performance
S. Wang, F.C. Lee, D.Y. Chen et al. · IEEE Transactions on Power Electronics · 2004 · 302 citations