IEEE Transactions on Industrial Electronics · 2012 · 661 citations · 24 references
ArchitectureElectrical EngineeringEnergy SystemsPower ElectronicsRenewable Energy SystemsFrequency RegulationMicrogrid ManagementMicrogridsPower Grid AnalysisPower System StabilityVoltage RegulationCurrent ControlDroop ControlInvertersMicrogrid ArchitectureMicrogrid OperationSynchronizationVoltage Control In MicrogridsVoltage Source Inverters
Power electronics based MicroGrids consist of a number of voltage source inverters (VSIs) operating in parallel. The paper models, designs control for, and analyzes stability of parallel three‑phase VSIs. The authors develop a hierarchical control scheme using stationary‑reference‑frame voltage and current inner loops, droop‑based primary control with virtual impedance for power sharing, secondary control to restore frequency and amplitude, and a synchronization algorithm for grid connection. Experimental results validate the performance and robustness of the proposed parallel VSI control architecture.
Power electronics based MicroGrids consist of a number of voltage source inverters (VSIs) operating in parallel. In this paper, the modeling, control design, and stability analysis of parallel connected three-phase VSIs are derived. The proposed voltage and current inner control loops and the mathematical models of the VSIs are based on the stationary reference frame. A hierarchical control scheme for the paralleled VSI system is developed comprising two levels. The primary control includes the droop method and the virtual impedance loops, in order to share active and reactive power. The secondary control restores the frequency and amplitude deviations produced by the primary control. Also, a synchronization algorithm is presented in order to connect the MicroGrid to the grid. Experimental results are provided to validate the performance and robustness of the parallel VSI system control architecture.
24