A Low-Temperature Direct-Current Comparator Bridge

Abstract

The application of superconducting direct-current comparators to the measurement of resistance ratios is described. One comparator consists of a binary set of ratios between 1:1 and 160:1 providing for self-calibration by a buildup procedure. A second comparator exhibiting discrete ratios of 1:1, 10:1, and 100:1 is also described. Ratio uncertainty of less than 1 part in 109 is achieved by enclosing the ratio windings in overlapping toroidal superconducting shields. Superconducting quantum interference devices (SQUID's) serve as flux sensors for the comparators. One of these current comparators is used to calibrate a 100-Ω:1-Ω resistive divider, which at a current of 10 mA exhibits a self-heating error of 0.0023 ppm.