Design, Manufacturing and Test of a Plug Nozzle Rocket Engine

Eric Besnard, Hsun Hu Chen, Tom Mueller, John Garvey

2002 · 32 citations · 14 references

Concepts

Abstract

The paper presents the design, manufacture and test of a small 1000 lbf ablative annular plug nozzle rocket engine. The engine was developed by students with the help from faculty and industry professionals as part of the California Launch Vehicle Education Initiative (CALVEIN). The design methodology is presented for the overall engine and its subsystems (injector, combustion chamber and plug nozzle). The flow over the plug nozzle is analyzed in more detail using Computational Fluid Dynamics (CFD) in conditions corresponding to a static fire test. Based on this analysis, the approximate design method used for determining the plug nozzle shape is shown to yield a highly efficient nozzle. The analysis also shows the importance of modeling flow property variations with temperature. The engine characteristics are discussed along with its manufacturing. The engine was tested and operated successfully for 200 ms after which the graphite plug failed. A different approach for securing the plug nozzle is under investigation and should lead to a new engine in the next few months. Finally, benefits of doing technology development and validation at such scales are presented. The example of CFD method validation for power-on in -flight flow conditions in subsonic, transonic and supersonic regimes is discussed.

References

14