Production Decline Performance of CBM Wells

K.E. Okuszko, B. W. Gault, Louis Mattar

Canadian International Petroleum Conference · 2007 · 25 citations · 9 references

Concepts

Abstract

Abstract One of the unresolved issues in the evaluation of coalbed methane (CBM) reserves is whether the long term production profile is exponential or hyperbolic. The type of decline used to forecast production can have a significant effect on the remaining reserves; hence, a thorough investigation of CBM decline is warranted. Before investigating the decline behavior of CBM wells, the literature on conventional gas decline analysis is summarized and the factors affecting production performance are discussed. The production performance of CBM is then investigated and compared to conventional gas performance. Simulations were conducted in order to determine the sensitivity of the hyperbolic decline exponent, b, to different reservoir and operating conditions. It was determined that several parameters, including the flowing pressure, affect the decline of conventional gas and CBM wells. Introduction The objective of this study is to review traditional decline analysis and discuss its applicability to CBM. Traditional decline analysis is based on the Arps'(1) equation which was introduced in the 1940's. It is an empirical relation that extrapolates a production forecast based on a curve fit of historical data. The general equation is given by Equation (1) (Available in full paper) The initial decline rate, Di., and decline exponent, b, are constants used to calculate rate as a function of time. The theoretical limits on the decline exponent are 0 and 1. There are three specialized forms of the equation: exponential, hyperbolic and harmonic. Exponential decline is defined by a b value of 0 and can be recognized in several ways:The decline rate, D,(Available in full paper), is constant at all timeA plot of gas rate versus cumulative gas production will be a straight lineA plot of the logarithm of gas rate versus time will be a straight line Hyperbolic decline is defined by a b value between 0 and 1 and can be recognized if:The decline rate, D, is decreasing constantly with time.A plot of gas rate versus cumulative gas production has a concave upward appearance. Use of the exponential equation produces a more conservative reserve estimate than the hyperbolic equation, given the same initial decline rate, Di. It is often difficult to distinguish between exponential and hyperbolic decline without a considerable amount of data, so it is up to the judgment of the evaluator to use an appropriate b value. Analogous production history is often used as guidance. The choice of b value no only influences the estimate of reserves, but it also affects how long and at what rates the well will produce, which directly affects the economics of a project. Though Equation 1 is widely used, it does have limitations. It is only valid during boundary-dominated-flow, and when thewell's flowing pressure is constant. Fetkovich(2) created type curves that combine transient solutions with the boundarydominated stems of the Arps' equation. The type curve allows the entire data set to be analyzed, but it is still limited by the constant flowing pressure assumption.

References

9