Comparison of Full-Duplex and Half-Duplex Modes with a Fixed Amplify-and-Forward Relay

Taneli Riihonen, Stefan Werner, Risto Wichman

2009 · 175 citations · 13 references

Concepts

TL;DR

The study investigates the capacity trade‑off between full‑duplex and half‑duplex transmission in a two‑hop amplify‑and‑forward relay system. We derive closed‑form expressions for the average end‑to‑end capacity and evaluate the maximum loop‑interference power that still allows full‑duplex to match half‑duplex capacity. The results demonstrate that tolerating some loop interference in full‑duplex can yield higher capacity than allocating two orthogonal channels in half‑duplex, and that under practical SNRs full‑duplex is preferable.

Abstract

We study the fundamental capacity trade-off between full-duplex and half-duplex transmission modes in a two- hop communication system with a fixed infrastructure-based amplify-and-forward relay. First, we derive closed-form expressions for the average end-to-end capacity in the relay link. We show that it may be better to tolerate some loop interference with the full-duplex mode than to consume channel resources by allocating two orthogonal channels with the half-duplex mode. Furthermore, we evaluate the maximum loop interference power levels that still allow the full-duplex mode to achieve the same capacity as the half-duplex mode. Our results indicate that with practical signal-to-noise ratio values, the full-duplex mode is preferable in terms of capacity.

References

13