A Cascade Multilevel Converter Topology With Reduced Number of Switches

Ebrahim Babaei

IEEE Transactions on Power Electronics · 2008 · 661 citations · 18 references

Concepts

TL;DR

The paper proposes a new multilevel converter topology with many voltage steps that uses fewer switches and studies its optimal design for minimizing switches, capacitors, and switch voltage while maximizing output steps. The converter is built from series‑connected sub‑multilevel blocks and includes an algorithm to compute the DC source magnitudes. Simulations and experiments on a single‑phase 53‑level prototype confirm that the topology reduces switches, losses, area, and cost while delivering high‑step output.

Abstract

This paper introduces a new multilevel converter topology that has many steps with fewer power electronic switches. The proposed circuit consists of series-connected submultilevel converters blocks. The optimal structures of this topology are investigated for various objectives, such as minimum number of switches and capacitors, and minimum standing voltage on switches for producing maximum output voltage steps. A new algorithm for determination of dc voltage sourcespsila magnitudes has also been presented. The proposed topology results in reduction of the number of switches, losses, installation area, and converter cost. The operation and performance of the proposed multilevel converter has been verified by the simulation and experimental results of a single-phase 53-level multilevel converter.

References

18