Out-of-Plane Seismic Capacity of Masonry Depending on Wall Section Morphology

Gianmarco de Felice

International Journal of Architectural Heritage · 2011 · 169 citations · 10 references

Concepts

TL;DR

The study addresses how masonry walls behave under out‑of‑plane seismic loads—whether they act monolithically or split—and how construction workmanship influences this behavior, noting that these issues remain poorly understood despite recent seismic events. The authors investigate how the morphology of masonry wall sections influences their out‑of‑plane seismic capacity. They model real historic masonry sections with the distinct element method and estimate seismic capacity through pushover and dynamic analyses under increasing horizontal forces and acceleration pulses. The analyses show that masonry sections with weaker transverse stone bonds exhibit reduced strength and displacement capacity. Keywords: masonry, seismic assessment, discrete element method, collapse mechanisms, pushover, dynamic analysis, historic manuals; funded by the Civil Protection Department‑Italian Network of Seismic Laboratories.

Abstract

Abstract To what extent does a wall subjected to out-of-plane seismic action behave monolithically and fail by overturning or, conversely, split into separate leaves? How much does the workmanship—the set of construction specifications that historical treatises collect under the definition of “rule of art”—influence the structural behaviour of the wall? These research topics have proved highly significant in the recent seismic events, but yet remain insufficiently known and handled without the appropriate analysis tools. In this article, the dependence of the out-of-plane seismic capacity of masonry walls on the morphology of the wall section is investigated starting from real masonry sections, surveyed from historic buildings, which are modelled using the distinct element method. The seismic capacity is estimated by pushover analyses with uniform increasing horizontal forces and dynamic analyses under acceleration pulses. The results highlight the effective reduction in strength and displacement capacity of masonry sections depending on the transverse bond provided by stones. Keywords: masonryseismic assessmentdiscrete element methodcollapse mechanismspushoverdynamic analysishistorical manuals ACKNOWLEDGMENTS The research has been carried out with the financial support of the Civil Protection Department-Italian Network of Seismic Laboratories (RELUIS) under the Contracts signed on July 11, 2005, Research Line 1, and on September 24, 2009, Thematic Area 1, Research Line 1, Task 1.

References

10