In situ composites: Blends of isotropic polymers and thermotropic liquid crystalline polymers

Gábor Kiss

Polymer Engineering and Science · 1987 · 552 citations · 17 references

Concepts

TL;DR

Melt blending conventional isotropic polymers with thermotropic liquid crystalline polymers (LCP) yields significant reinforcement, and unlike fiber fillers, the LCP forms during processing, eliminating the need for pre‑made fibers. Minor LCP content forms elongated domains aligned with the flow during melt blending. The LCP enhances blend strength and stiffness, eliminates typical fiber‑filler issues, and reduces viscosity and processing wear.

Abstract

Abstract Melt blending of a variety of conventional isotropic polymers (both crystalline and amorphous) has shown that considerable reinforcement is obtained from the inclusion of thermotropic liquid crystalline polymers (LCP). When the LCP is a minor component it forms highly elongated domains parallel to the flow direction. The intrinsically high strength and stiffness of the LCP improve the mechanical properties of the resulting blend. This approach is distinguished from the common practice of filling polymers with chopped glass and carbon fibers by the fact that the reinforcing component comes into existence during processing (molding or extrusion). Many of the problems associated with fibrous fillers are avoided. For example, viscosity of the “in situ composite” is actually lower than that of the base polymer and wear on the compounding and processing equipment is reduced.

References

17