IEEE Journal on Selected Areas in Communications · 2002 · 36 citations · 11 references
EngineeringCommunicationElectrical EngineeringAntennasDigital CommunicationWireless CommunicationsAnalog Integrated CircuitsDigital Signal ProcessingInterference ManagementMixed-signal Integrated Circuit DesignNoise ReductionRadio Frequency Interference MitigationAdaptive Noise CancellationAnalog-to-digital ConversionBandwidthCommon-mode InterferenceInterferenceInterference CancellationInterference SuppressionNoise Sources
Among all noise sources present in wireline transmission systems we focus on one special type: narrowband radio frequency interference generated by radio amateurs (RAM) and broadcast radio stations. This disturbance, characterized by high power and narrow bandwidth, has the potential of overloading the receiver's analog-to-digital converter (ADC). Once the ADC is in saturation, any countermeasure taken in digital domain will fail. A viable way to face this problem is cancellation using the common-mode signal as a reference. This paper describes in detail an adaptive, mixed-signal, narrowband interference canceller employing a modified recursive least-squares algorithm, which is split into an analog and a digital part. The mixed-signal approach enables the circuit to generate an interference-cancelling signal of several MHz while operating the adaptive algorithm at some kilohertz. Simulation as well as measurement results show a steady-state disturbance suppression of about 35 dB. The convergence speed is high enough to protect the ADC from overloading due to time-variant HAM interference.
11
Steven C. Rogers · Control Engineering Practice · 1996 · 9.3K citations
Adaptive noise cancelling: Principles and applications
Bernard Widrow, John R. Glover, J. McCool et al. · Proceedings of the IEEE · 1975 · 3.9K citations
Mitigation of radio interference in xDSL transmission
L. De Clercq, M. Peeters, Sigurd Schelstraete et al. · IEEE Communications Magazine · 2000 · 40 citations