Journal of Polymer Science · 1961 · 26 citations · 10 references
Natural SciencesMaterials EngineeringMaterials ScienceBiomaterialsCrystal StructureMaterials ProcessingCellulose ChemistryCrystallization ProcessesExtraction TechniquesTextile MaterialsAbsorption SpectraCellulose ConversionCellulose CrystallinityCellulose CrystallizationCellulose CrystallographyInfrared Absorption SpectraInfrared SpectraInterplanar Spacing
Abstract Complete conversion of the cellulose crystal lattice to that of the ethylenediamine‐cellulose complex can be attained with aqueous ethylenediamine solutions of 60% and greater. Cellulose in the form of loose cotton yarn or woven fabric immersed in 98% ethylenediamine solution for as little as 1 minute is as completely complexed as that immersed 4 hours. Removal of ethylenediamine in excess to that required by the diamine‐cellulose complex is accomplished as effectively by hexane extraction as by evaporation under reduced pressure (8 mm. Hg at 95–100°C.). Using the latter procedure, a period of 2 hr. is sufficient to reduce the diamine content to that which has been obtained after longer periods, i.e., about 20%. The x‐ray diffractograms of the complexes prepared from celluloses I, II, and III suggest that the starting material influences the interplanar spacings of the crystal lattice of the complex. They also show that water‐extraction of the complex prepared from cellulose II restored the cellulose II lattice, while cellulose I is obtained when cellulose III is used. The infrared absorption spectra of the complexes prepared from celluloses II and III are similar and show slight differences from that of the cellulose I complex. After water extraction of the diamine, the spectrum of the material from the cellulose III complex closely resembles that of the cellulose I material.
10