2005 · 22 citations · 18 references
EngineeringMechanical EngineeringCombustionInternal Combustion EnginesMultiphase FlowCombustion FundamentalsCombustion In EnginesCombustion InstabilityCombustion ProcessesEngine TestingLiquid Rocket EnginesCombustion Chamber DesignCombustion CharacteristicsCombustion DynamicsCombustion PerformanceCombustor DynamicsLiquid Fuel InjectionPost InjectionSwirl
*† † ‡ A single injector element liquid rocket combustion experiment was designed and conducted to provide insight into combustion dynamics and to develop an effective tool to rate the stability of injectors prior to a full-scale engine build. A gas-centered, liquid swirl coaxial injector element was selected for the study. Kerosene and a mixture of superheated water and oxygen vapor were used as the liquid fuel and gaseous oxidizer, respectively. The lengths of the oxidizer injection post and combustion chamber were tested at stabilizing and destabilizing combinations. The variable length combustion chamber was discretely varied between 25.4 and 88.9 cm. The mean chamber pressure ranged from 2.14 – 2.38 MPa. Nine of the ten tests exhibited strong instabilities with amplitudes of 0.69 to 1.38 MPa peak to peak, and wave slopes on the order of 10 9 Pa/s. The unstable frequencies ranged from 1184 Hz to 1721 Hz. A noted decrease in combustion efficiency accompanied increasing strength of the instabilities. One test, with a 25.4 cm chamber, was classically stable with pressure oscillation amplitudes less than 5% of the mean pressure. Resonant frequencies calculated from a linear model developed to solve the coupled injector-chamber acoustics were always within 6% of the measured unstable frequency. The acoustics model also indicated that there were available system resonances that were not excited by the combustion process, possibly indicating a sensitive bandwidth of the injector response.
18
Swirl Coaxial Injector Development
Richard Cohn, Peter Strakey, R. Bates et al. · 41st Aerospace Sciences Meeting and Exhibit · 2003 · 33 citations
Engineering, Aerospace Engineering, Mechanical Engineering +17