Multiple Surrogate Modeling for Axial Compressor Blade Shape Optimization

Abstract

A major issue in surrogate model-based design optimization is the modeling fidelity. An effective approach is to employ multiple surrogates based on the same training data to offer approximations from alternative modeling viewpoints. This approach is employed in a compressor blade shape optimization using the NASA rotor 37 as the case study. The surrogate models considered include polynomial response surface approximation, Kriging, and radial basis neural network. In addition, a weighted average model based on global error measures is constructed. Sequential quadratic programming is used to search the optimal point based on these alternative surrogates. Three design variables characterizing the blade regarding sweep, lean, and skew are selected along with the three-level full factorial approach for design of experiment. The optimization is guided by three objectives aimed at maximizing the adiabatic efficiency, as well as the total pressure and total temperature ratios. The optimized compressor blades yield lower losses by moving the separation line toward the downstream direction. The optima for total pressure and total temperature ratios are similar, but the optimum for adiabatic efficiency is located far from them. It is found that the most accurate surrogate did not always lead to the best design. This demonstrated that using multiple surrogates can improve the robustness of the optimization at a minimal computational cost. Copyright © 2007 by the American Institute of Aeronautics and Astronautics, Inc. All rights reserved.