ChemPhysChem · 2005 · 25 citations · 12 references
Natural SciencesChemistryMaterials SciencePhysical ChemistryPolymer ChemistryPolymer MaterialsCrystallization ProcessesCrystallographyPolymer CharacterizationPolymer Phase BehaviorPolymer PhysicsPolymer ThermodynamicsCrystallizationCrystallization MechanismsDifferential CalorimetryMesh SizePolymer Crystallization KineticsPolymer Crystallization ThermodynamicsPolymer-solvent InteractionsPolypropylene
The solvents o-, m-, p-xylene, p-dichlorobenzene, 1,2,4-trichlorobenzene, and naphthalene were calibrated as condensates used in the thermoporosimetry technique. Exponential relationships were found connecting the pore radii R(p) (in nm) and the freezing-point depression of the swelling solvent deltaT (in degrees C) on the one hand and the apparent energy of crystallization W(a) (in J cm(-3)) and deltaT on the other hand: R(p) = t exp[-1/(c deltaT)]; W(a) = W0 exp(deltaT/f). Pore- or mesh-size distributions can be derived from differential scanning calorimetry results by using the following equation: dV(p)/dR(p) = k{[cY(T)deltaT2]/[W(a)R(p)]}. All the numerical parameters were determined. Polyethylene and polypropylene samples, cross-linked with high-energy electrons or gamma-rays, were submitted to thermoporosimetry study. Relative mesh-size distributions, which depend on the polymer/solvent pair, were calculated for these polyolefins with o-, m-, and p-xylene as solvent and were found to be in the same sequence as those of their degrees of swelling and the irradiation doses received.
12
Mohamed Baba, Jean‐Marie Nédélec, J. Lacoste et al. · Polymer Degradation and Stability · 2003 · 59 citations
Natural Sciences, Materials Engineering, Materials Science +12