1993 · 22 citations · 5 references
EngineeringElectrical EngineeringMaterials ScienceAnalog ElectronicsAntennasMicrowave EngineeringAntenna DesignMicrowave FiltersMicrowave Integrated CircuitsMicrowave PackagingMicrowave ResonatorsSmall AntennasFiltersInsertion LossMicrostrip FiltersMicrowave Duplexer DesignMicrowave DuplexersMicrowave Filter DesignMicrowave Filter ResonatorsPlanar Filters
For smaller handheld telephones, we have developed a small antenna duplexer. This paper describes the fabrication and characteristics of our duplexer. Our package, which comprises two cavities and impedance control circuits with a strip line, has a multilayered structure. The package is made of glass-ceramic of size 7.5×8.5×2.5 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sup> . The conductor patterns of the package are made of Cu. For the SAW filter of the duplexer, we used the ladder type filter composed of one-port SAW resonators. Typical frequency response characteristics of the AMPS specification are 2.5/3.5 dB.(transmitter/receiver) insertion loss at maximum in the 25 MHz passband, and 35/29 dB stopband rejection. We also improved the filter lifetime using a three-layer Al-Cu/Cu/Al-Cu electrode film structure to 300 times the lifetime of a comparable Al-Cu single-layer filter. From the Arrhenius plot, the lifetime was estimated at more than 500000 hours at 120°C for an input power of 1 W
5
Wideband low loss double mode SAW filters
T. Morita, Yasuo Watanabe, Motonao Tanaka et al. · 2003 · 129 citations
Development of low-loss band-pass filters using SAW resonators for portable telephones
O. Ikata, Takuya Miyashita, T. Matsuda et al. · 2003 · 106 citations