Journal of Chemical Technology & Biotechnology · 2014 · 24 citations · 49 references
Natural SciencesChemical EngineeringChemistryCatalysisNanomaterialsUltrasoundCatalyst CharacterizationCatalyst SynthesisCatalytic MaterialsMetal Oxide NanomaterialsNanocatalysisZeolite CatalysisCatalytic NanomaterialsMetal Oxide Catalyst SynthesisMetal Oxide CatalystsMetal Oxide NanocatalystsNanoparticle CatalystsNanostructured CatalystsOxidationVolatile Organic Compound Oxidation
Abstract BACKGROUND To remove toluene (a representative volatile organic compound ( VOC )) from a waste gas stream, catalytic oxidation was utilized over Cu/Clinoptilolite– CeO 2 nanocatalyst. The nanocatalyst with different loadings of Cu (5, 10, 15 wt%) was sonochemically synthesized and its performance in catalytic oxidation of toluene was studied. Characterization by XRD , FESEM , BET , EDX and FTIR were applied . RESULTS XRD results indicated well‐dispersed small copper particles even at high loadings of copper. Non‐sonicated Cu/Clinoptilolite– CeO 2 catalyst showed agglomerated, non‐uniform morphology, while small particles with uniform shape and size with different degrees of agglomeration were observed in sonicated Cu/Clinoptilolite– CeO 2 catalyst. A narrow particle size distribution with average size 21 nm was observed in the sonicated sample. BET analysis demonstrated considerable effects of HCl treatment in increasing the specific surface area of clinoptilolite. It also showed the strong influence of CeO 2 addition as a promoter that sharply enhanced the surface area to 71.7 m 2 g −1 . CONCLUSION Catalytic performance tests revealed that Cu(15%)/Clinoptilolite– CeO 2 synthesized with ultrasound had the best performance of about 98% toluene abatement even at high concentrations of toluene (3000 ppm). A stability test of the synthesized nanocatalyst confirmed its constant activity for 1440 min, making it a promising catalyst for removal of VOCs . © 2014 Society of Chemical Industry
49