HEAT TRANSFER MODEL FOR PLUG-FLOW ANAEROBIC DIGESTERS

K. G. Gebremedhin, Bintao Wu, Curt Gooch, Peter E. Wright, Scott Inglis

Transactions of the ASAE · 2005 · 49 citations · 0 references

Concepts

Abstract

A comprehensive and fundamental mathematical model that predicts energy requirements to operate a plug-flowanaerobic digester at a specified temperature was developed. This information is supportive to designers as they determineheating requirements and energy use by the digester system. The model accounts for heat loss/gain by the influent and effluentflows, the digester floor, and the top-covering material and walls. In addition, the model accounts for frozen groundsurrounding digester walls, thus increasing heat loss through the walls. Solar energy transmitted through the top-coveringmaterial is also accounted for in the model. Predicted heat was validated against experimental data, and the results agreereasonably well. The model can be used to estimate energy requirements to operate a plug-flow anaerobic digester on a daily,monthly, or yearly basis. Low energy was required to operate the digester in June through August, the lowest being in July,and more energy was required in November through March. Considerable energy could be saved if the effluent manure heatwas used to pre-heat the influent manure.