Low-Loss Integrated-Waveguide Passive Circuits Using Liquid-Crystal Polymer System-on-Package (SOP) Technology for Millimeter-Wave Applications

Abstract

In this paper, we show a low-loss integrated waveguide (IWG), microstrip line-to-IWG transition, IWG bandpass filter (BPF), and system-on-package (SOP) using a liquid-crystal polymer (LCP) substrate, which can be used toward SOP technology for millimeter-wave applications. The proposed IWG can be used as a low-loss millimeter-wave transmission line on this substrate. The measured insertion loss of the IWG is -0.12 dB/mm and the measured insertion loss of two microstrip line-to-IWG transitions is -0.14 dB at 60 GHz. The evaluated IWG filter is demonstrated as the pre-select filter for RF front-end modules at the millimeter-wave band. The fabricated three-pole BPF at a center frequency of 61.1 GHz has specifications: a 3-dB bandwidth of approximately 13.4% (~8.4 GHz), an insertion loss of -1.8 dB at the center frequency of 61.1 GHz, and a rejection of >15 dB over the passband. The proposed IWG can also be used as a low-loss millimeter-wave feed-through transition and interconnection between the monolithic microwave integrated circuit and the module instead of the vertical via structure. In terms of a SOP on LCP for millimeter-wave applications, the top face of the IWG does not have any electromagnetic effects, and a package lid can be attached to provide a hermetic sealing. These low-loss IWG circuits on LCP can easily be used in many millimeter-wave packaging applications