The design and performance of a simultaneous transmission and emission tomography system

G.T. Gullberg, H.T. Morgan, Gengsheng L. Zeng, Paul E. Christian, V.R. Di Bella, Chi‐Hua Tung, Piotr Maniawski, Yu‐Lung Hsieh, Frederick L. Datz

IEEE Transactions on Nuclear Science · 1998 · 36 citations · 36 references

Concepts

Abstract

A commercial three-detector single-photon emission computed tomography (SPECT) system that enables simultaneous acquisition of transmission and emission data without increasing patient scanning time has been designed and manufactured. This system produces a reconstructed attenuation coefficient distribution that can be used to correct for photon attenuation in the emission reconstruction. The three detectors with fan-beam collimators are mounted to the gantry in a triangular arrangement. A transmission line source assembly was mounted at the focal line of one of the detectors and controlled to move in synchrony with the opposing fan-beam collimator. Data from transmission and emission sources at different energies were acquired in one detector, while the other two simultaneously acquired emission data. A transmission source of /sup 153/Gd was used with /sup 99m/Tc-labeled radiopharmaceuticals, and /sup 57/Co was used with /sup 201/Tl. Algorithms were developed to subtract crosstalk between transmission and emission energy windows in all three detectors. A transmission maximum-likelihood iterative algorithm was used to reconstruct the attenuation distribution, which was used in combination with an iterative maximum-likelihood expectation-maximization algorithm to compensate for the attenuation of the projection of the emission distribution. The results in phantom studies displayed greater uniformity of activity with attenuation-corrected reconstruction. This was demonstrated visually and quantitatively by using anterior-to-inferior ratios close to one and low spatial %rms error as a measure of improved uniformity.

References

36