Integrating Construction Process Documentation into Building Information Modeling

James Goedert, Pavan Meadati

Journal of Construction Engineering and Management · 2008 · 273 citations · 10 references

Concepts

TL;DR

The study focuses on a military base that uses 3D modeling for underground services and building footprints, noting that BIM research largely ends at preconstruction with limited data collection on the construction process. The authors aim to determine whether construction process data and related documents can be captured in BIM and to develop 3D and 4D as‑built models with attached process information for post‑construction use. The study extended BIM use through construction, conducted in parallel with traditional methods, and produced 3D and 4D as‑built models that incorporate construction process data. The work delivers practical 3D data‑collection methods and extends BIM software to support construction process documentation, but demonstrates that existing BIM tools require procedural and software modifications to capture such data.

Abstract

The research described in this paper extends the use of building information modeling (BIM) throughout the construction phase of the project life cycle. The owner is a military base that uses three-dimensional (3D) modeling for underground services and the footprints of the buildings. They were interested in determining the feasibility of capturing the construction process and related documents into a similar format. The research was conducted in parallel with traditional methods. The objectives of this project were to create a 3D as-built model, a four-dimensional as-built model, and attach the construction process information to the model for the owner to use after construction. A literature review indicates that BIM application stops at the preconstruction phase with a limited amount of research regarding data collection of the construction process. Significant contributions include practical 3D data collection methods and extending the BIM software products to accommodate construction process documentation. Results indicate that BIM software is not specifically prepared to accomplish these objectives and some modification to procedures as well as software were necessary for the BIM to capture the construction process documentation.

References

10