Design of a bistatic dual-Doppler radar for retrieving vector winds using one transmitter and a remote low-gain passive receiver

Abstract

A bistatic dual-Doppler network consisting of an existing single transmitting pencil-beam weather radar and a remotely located, nontransmitting, passive bistatic receiver with a low-gain antenna was constructed and tested during 1993. High-quality dual Doppler vector winds were retrieved from this system. The windfields were compared with those collected with a traditional two-transmitter dual-Doppler system. Several interesting engineering challenges relating to frequency and timing synchronization were resolved in order to retrieve successfully Doppler velocities at a remote bistatic site. Frequency synchronization was achieved by using extremely stable local oscillators, linked by both Global Positioning Satellite (GPS) signals and transmitter sidelobe coupling. Both methods provided the necessary one part in 10/sup 9/ coherence necessary for calculating accurate Doppler velocities. Timing/gating synchronization with submicrosecond accuracy was achieved by using local oscillators at each site linked with GPS and sidelobe coupling. The successful testing of this system demonstrates that inexpensive and practical bistatic multiple-Doppler networks can be deployed. These systems can provide three-dimensional vector winds for a number of purposes in research, aviation, media, weather prediction, education, meteorological modeling and severe weather detection.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">&gt;</ETX>