IEEE Transactions on Magnetics · 1992 · 14 citations · 0 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsMetallic MaterialsMetallurgyCold WorkingDuctilityElectrical ConductivityHigh-temperature MaterialsSuperconducting MaterialsWork HardeningElectrical PropertiesFracture SurfacesHigh-temperature Superconducting MagnetsHigh-temperature SuperconductorsResistivitySuperconducting MagnetsSuperconducting WiresWire Material Properties
Mechanical and electrical properties have been studied for a heavily cold-worked high-purity Ta wire. Tensile test at room temperature shows a large 0.2% proof stress of about 70 kg/mm/sup 2/, which is probably caused by work-hardening in the wire drawing process. Observations of fracture surfaces using a scanning electron microscope indicate that this material is very ductile. Moreover, this sample has a low resistivity of about 0.4 mu Omega -cm even at the high field of 15 T. The residual resistivity ratio is about 80, which is consistent with the high purity of the sample. Therefore, it has been found that the cold-worked Ta wire is applicable to a reinforcing stabilizer for conductors of large-scale and/or high-field superconducting magnets.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">></ETX>