Shunt Active-Power-Filter Topology Based on Parallel Interleaved Inverters

Abstract

In this paper, an interleaved active-power-filter concept with reduced size of passive components is discussed. The topology is composed of two pulsewidth-modulation interleaved voltage-source inverters connected together on the ac line and sharing the same dc-link capacitor. The advantages of the proposed approach are as follows: 1. significant reduction in the linkage inductors' size by decreasing the line-current ripple due to the interleaving; 2. reduction of the switching stress in the dc-link capacitor, due to the shared connection; and 3. more accurate compensation for high-power applications, because the power sharing allows one to use a higher switching frequency in each inverter. This paper analyzes the design of the passive components and gives a practical and low-cost solution for the minimization of the circulation currents between the inverters, by using common-mode coils. Several simulation results are discussed, and experimental results with a three-phase 10-kVA 400-V unit are obtained to validate the theoretical analysis.