2005 · 13 citations · 10 references
EngineeringElectrical EngineeringAnalog ElectronicsHardware-software Co-designMicrowave EngineeringDistortion AnalysisMixed-signal Integrated Circuit DesignRadio-frequency Integrated CircuitsReceiver SystemsDirect Conversion ReceiversFront-end DesignReceiver ArchitectureReceiver CalibrationReceiver Front-endsSoftware Defined RadioTechnical FeasibilityTunable Circuits
Well-known receiver architectures, such as wideband-IF-receivers or zero-IF-receivers, usually require highly accurate component matching. For the realization of a software defined radio (SDR) device, the requirement of adjustability supervenes. Contemporarily, much effort is being made to develop tunable circuits and also to find new algorithms for digital elimination of analog signal distortions, etc. In order to reduce the effort for the analog receiver front-end and to bridge the gap between system architectures and circuit technologies, the alternative six-port receiver was investigated. Based on the six-port structure, we present a five-port receiver front-end architecture with signal path mismatch cancellation. To be able to regenerate the IQ-components, a calibration technique is presented based on the proposed architecture. Therefore, known algorithms can be utilized after the calibration. The main focus is the technical feasibility of the front-end in SDR mobile terminals.
10
A new direct millimeter-wave six-port receiver
Serioja Ovidiu Tatu, E. Moldovan, Ke Wu et al. · IEEE Transactions on Microwave Theory and Techniques · 2001 · 195 citations
Direct-conversion RF receiver design
Won Namgoong · IEEE Transactions on Communications · 2001 · 125 citations