Energy Technology · 2015 · 23 citations · 63 references
EngineeringChemical EngineeringChemistryCombustionInorganic ChemistryReaction EngineeringCombustion KineticsCombustion Reaction EngineeringFuel ChemistryIron OxidesMetal OxidesCombustion PerformanceCombustion Performance AnalysisCombustion ReactionsComplex OxidesCoprecipitationCoprecipitation SynthesisMixed Metal OxidesOxide Phase Stability
Abstract Low‐cost oxygen carriers with multicycle chemical looping combustion (CLC) performance and CO 2 selectivity have been explored to realize a practical oxygen carrier to obtain sequestration‐ready CO 2 from the combustion processes. The cubic structures of the pure mixed oxides of Fe and Mn (Fe 3 Mn 3 O 8 and FeMnO 3 ; Fe–Mn–O) were prepared successfully as oxygen carriers through a coprecipitation method. The Fe–Mn–O systems showed 100 % CH 4 combustion performance in the absence of air or oxygen. MnO and Fe 3 O 4 are the reduced products of the Fe–Mn–O systems after the CH 4 combustion reaction. The regeneration of the Fe–Mn–O phase was achieved readily by reoxidation of their reduced products in air. The Fe–Mn–O systems showed a stable and multicycle CLC performance, however, the individual oxides of Fe and Mn showed an inferior CLC performance. Pure CO 2 was formed during the CH 4 combustion reaction of the Fe–Mn–O systems with practically no toxic CO byproduct. Therefore, the mixed oxide phase of Fe and Mn shows potential as a practical oxygen carrier in terms of its multicycle CLC performance and CO 2 selectivity.
63
Selection of Oxygen Carriers for Chemical-Looping Combustion
Juan Adánez, Luis F. de Diego, Francisco Garcı́a-Labiano et al. · Energy & Fuels · 2004 · 751 citations