Magnetic Properties and Giant Magnetoimpedance of FeNi-Based Nanostructured Multilayers With Variable Thickness of the Central Cu Lead

E. Fernández, A. Garcı́a-Arribas, J.M. Barandiarán, V. N. Lepalovskij, G. V. Kurlyandskaya

IEEE Transactions on Magnetics · 2011 · 37 citations · 17 references

Concepts

Abstract

The magnetoimpedance effect is attractive for thin film-based magnetic sensor applications. Recently a significant progress has been made in the development of appropriate theories, preparation and characterization of MI thin film-based structures. In the present work FeNi(100 nm)/Cu(3.2 nm)] <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">4</sub> /FeNi(100 nm)/Cu(L <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">Cu</sub> )/[FeNi(100 nm)/Cu(3.2 nm)] <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">4</sub> /FeNi(100 nm) multilayered structures with open magnetic flux have been prepared by RF-sputtering. Their magnetic properties and MI were studied as a function of the thickness of the central Cu lead. It was shown that the thickness of the Cu lead is an important parameter. The highest sensitivity (≈ 50%/Oe, f=160 MHz) was observed for the sample with a central Cu layer thickness of about a half-thickness of a magnetic layer (L <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">Cu</sub> ≈ 250 nm). The maximum sensitivity of the real part of the impedance was also obtained for this thickness (≈ 75%/Oe).

References

17