Motion-Compensation Improvement for Widebeam, Multiple-Receiver SAS Systems

Abstract

The effect that uncompensated motion errors have on synthetic aperture sonar (SAS) imagery can be severe. Time-domain beamforming SAS reconstruction is able to compensate arbitrary track errors, but the more efficient frequency-domain reconstruction algorithms, such as the range-Doppler, chirp-scaling, and wave number ( <i xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">aka</i> range migration or Stolt-mapping) algorithms do not allow for simple compensation, especially for widebeam sonars. Data processed via these block algorithms is usually compensated before azimuth compression in a computationally inexpensive preprocessing step. Unfortunately, this compensation assumes a narrowbeam geometry, causing blurring in high-resolution images collected with widebeam sonars. In this paper, we demonstrate a new technique for compensation of large, but known, motion errors in data collected with widebeam geometry sonars. The technique relies on obtaining angle-of-arrival information from the multiple-receiver array configuration typical in high-resolution SAS systems. The new method of compensating for motion errors was found to significantly outperform the previous techniques in a simulation of point-reflector imagery.